澆注機加氣混凝土澆注機采用螺旋漿式攪拌，在罐內形成很強的渦流，破壞生石灰顆粒的包膜，使之達到充分均勻的混合。同時可升降的澆注臂隨澆注過程調整高度，防止飛濺。本機分固定式和移動式配合漿料，定量澆注在模具上。
The castable aerated concrete casting machine is stirred with
spiral slurry, which forms a strong eddy in the tank and destroys the
coating of lime particles to make it fully and evenly mixed. At the same
time, the lifting arm can adjust the height with the casting process to
prevent splash. The machine is divided into fixed and mobile size
mixture, and is poured on the mould.
澆注機分固定式和移動式配合漿料，定量澆注在模具上。
The pouring machine is divided into fixed and mobile size mixture, and is poured into the mold quantitatively.
扇形澆注機實際上是一
型線 流水槽模具 景觀石 檢查井鋼模具 保定通風管道 隔離墩模具 保定保潔公司種茶壺包的變形，是在40－50年前使用的一種設備。它采用從液面進行澆注，這就從原理上決定了，扇形澆包在補充鐵水時不能連續澆注，必須停產。讓我們計算一下這微不足到的損失到底有多少：生產球鐵時由于防止球化衰退，每8分鐘必須補充一次鐵水。生產灰鐵時由于鐵水溫度損失的影響，每13-15分鐘也需要補充一次鐵水。
Fan shaped pouring machine is actually a kind of teapot bag
deformation, which was used 40-50 years ago. It is used to pour from the
liquid surface, which is decided by principle. Fan casting ladle can
not be poured continuously when supplying hot metal, and it must be
stopped. Let's calculate how much the loss is: if we want to prevent
spheroidization, we must add molten iron every 8 minutes to produce
ductile iron. Due to the loss of molten iron temperature, the production
of gray iron needs to be supplemented once every 13-15 minutes
